130
Instruction Manual - Incite Digital Video Presentation Systems
Programming
Video SEND_COMMANDs (Cont.)
?VIDOUT_OSD
Requests whether the video output ports have the OSD setting enabled or disabled.
Syntax:
SEND_COMMAND <DEV>, “’?VIDOUT_OSD’”
Example:
SEND_COMMAND VIDEO_OUTPUT_1,”’? VIDOUT_OSD’”
Returns a COMMAND string of the form:
VIDOUT_OSD-<ENABLE|DISABLE>
VIDOUT_OSD
Enables or Disables the On Screen Display (OSD) setting on the video output ports. If enabled, then
the OSD setting is on. If disabled, then the OSD setting is off.
Syntax:
SEND_COMMAND <DEV>,” VIDOUT_’OSD-<ENABLE|DISABLE>’”
Example:
SEND_COMMAND VIDEO_OUTPUT_1,”’ VIDOUT_OSD-ENABLE’”
?VIDOUT_OSD_COLOR
Requests the On Screen Display (OSD) color on the display connected to the video port addressed
by the D:P:S.
Syntax:
SEND_COMMAND <DEV>, “’? VIDOUT_OSD_COLOR’”
Example:
SEND_COMMAND VIDEO_OUTPUT_1,”’? VIDOUT_OSD_COLOR’”
Returns a COMMAND string of the form:
VIDOUT_OSD_COLOR-<color>
VIDOUT_OSD_COLOR
Determines the On Screen Display (OSD) color scheme on the display connected to the video port
addressed by the D:P:S.
Variables:color = black, blue, white, yellow
Schemes:
Options Background Font
Black Black White
Blue Blue Yellow
White White Black
Yellow Yellow Blue
Syntax:
SEND_COMMAND <DEV>,”’VIDOUT_OSD_COLOR-<color>’”
Example:
SEND_COMMAND VIDEO_OUTPUT_1,”’VIDOUT_OSD_COLOR-BLACK’”
?VIDOUT_OSD_POS
Requests the On Screen Display (OSD) position on the display connected to the video port ad-
dressed by the
D:P:S.
Syntax:
SEND_COMMAND <DEV>, “’?VIDOUT_OSD_POS’”
Example:
SEND_COMMAND VIDEO_OUTPUT_1,”’?VIDOUT_OSD_POS’”
Returns a COMMAND string of the form:
VIDOUT_OSD_POS-<position>
VIDOUT_OSD_POS
Determines the On Screen Display (OSD) position on the display connected to the video port ad-
dressed by the
D:P:S.
Variables:position = TOP LEFT, TOP RIGHT, BTM RIGHT, BTM LEFT
Syntax:
SEND_COMMAND <DEV>,”’VIDOUT_OSD_POS-<position>’”
Example:
SEND_COMMAND VIDEO_OUTPUT_1,”’ VIDOUT_OSD_POS-TOP LEFT”
?VIDOUT_RES_REF
Requests the resolution and refresh rate of the video output ports.
Syntax:
SEND_COMMAND <DEV>, “’?VIDOUT_RES_REF’”
Example:
SEND_COMMAND VIDEO_OUTPUT_1,”’?VIDOUT_RES_REF’”
Returns a COMMAND string of the form:
VIDOUT_RES_REF-<h>x<v>,<rate>