![background image](http://html.mh-extra.com/html/amx/ncite-813/ncite-813_instruction-manual_2938703117.webp)
117
Instruction Manual - Incite Digital Video Presentation Systems
Programming
Audio SEND_COMMANDs (Cont.)
?AUDMIC_GATING_RELEAS
E
Requests the duration of the release phase while gating from the microphone port addressed by the
D:P:S.
Syntax:
SEND_COMMAND <DEV>, “’?AUDMIC_GATING_RELEASE’”
Example:
SEND_COMMAND MIC_1, “’?AUDMIC_GATING_RELEASE’”
Returns a string of the form:
AUDMIC_GATING_RELEASE=<value>
AUDMIC_GATING_RELEASE
Sets the duration of the release phase while gating from the microphone port addressed by the
D:P:S.
Syntax:
SEND_COMMAND <DEV>, “’AUDMIC_GATING_RELEASE-<release>’”
Variable:
release = 10 to 5000
Example:
SEND_COMMAND MICROPHONE_1, “’AUDMIC_GATING_RELEASE-200’”
Sets the gating release for the microphone port (#1 based on the D:P:S) to 200.
?AUDMIC_GATING_THRESH
Requests the threshold setting while gating from the microphone port addressed by the D:P:S.
Syntax:
SEND_COMMAND <DEV>, “’?AUDMIC_GATING_THRESH’”
Example:
SEND_COMMAND MIC_1, “’?AUDMIC_GATING_THRESH’”
Returns a string of the form:
AUDMIC_GATING_THRESH=<value>
AUDMIC_GATING_THRESH
Sets the threshold while gating for the microphone port addressed by the D:P:S.
Syntax:
SEND_COMMAND <DEV>, “’AUDMIC_GATING_THRESH-<thresh>’”
Variable:
thresh = 0 to -60
Example:
SEND_COMMAND MICROPHONE_1, “’AUDMIC_GATING_THRESH--20’”
Sets the gating threshold for the microphone port (#1 based on the D:P:S) to -20.
?AUDMIC_LIMITER
Requests the setting of the limiter of a microphone.
Syntax:
SEND_COMMAND <DEV>, “’?AUDMIC_LIMITER’”
Example:
SEND_COMMAND MIC_1,”’?AUDMIC_LIMITER’”
Returns a COMMAND string of the form:
AUDMIC_LIMITER-<setting>
AUDMIC_LIMITER
Enables or Disables whether the microphone addressed by D:P:S has the Limiter functionality
turned on.
Syntax:
SEND_COMMAND <DEV>,”’AUDMIC_LIMITER-<setting>’”
Variable:
setting = off, low, medium, high, custom
Example:
SEND_COMMAND MIC_1,”’AUDMIC_LIMITER-off’”
Turns off the limiter for the microphone port (#1 based on D:P:S).
?AUDMIC_LIMITER_ATTACK
Requests the duration of the attack phase while limiting from the microphone port addressed by
the D:P:S.
Syntax:
SEND_COMMAND <DEV>, “’?AUDMIC_LIMITER_ATTACK’”
Example:
SEND_COMMAND MIC_1, “’?AUDMIC_LIMITER_ATTACK’”
Returns a string of the form:
AUDMIC_LIMITER_ ATTACK=<value>
AUDMIC_LIMITER_ATTACK
Sets the duration of the attack phase while limiting for the microphone port addressed by the D:P:S.
Syntax:
SEND_COMMAND <DEV>, “’AUDMIC_LIMITER_ATTACK-<attack>’”
Variable:
attack = 1 to 2000
Example:
SEND_COMMAND MICROPHONE_1, “’AUDMIC_LIMITER_ATTACK-200’”
Sets the limiter attack for the microphone port (#1 based on the D:P:S) to 200.