MXR-1001
9
MXR-1001 - Installation & Hardware Reference Manual
Touch Panel Aspect Ratio
While the touch panel screen physical dimensions fall between 16:9 and 16:10, any incoming video stream can be scaled to 16:9 if
needed. This may lead to some letter boxing around the video in some cases.
Active Video Windows - Limitations
The term "Active Video Windows" refers to any "window" on the touch panel (which could be a Page, Popup, Sub-Page or Button)
that is displaying active video content.
Maximum supported number of active video windows displayed simultaneously on the panel:
2
While this limitation is not enforced (i.e the TPDesign5 application will allow you include any number of video windows in
the panel design), attempting to display more than two active video windows at one time may have a negative impact on the
panel’s overall performance.
Maximum supported resolution for video windows:
720dpi
Maximum supported frame rate for video windows:
30fps
MXR-1001 Motor Controller
The MXR-1001features the same hardware components and provides all of the functionality of the standard MXD-1001 10.1"
Modero X G5 Touch Panel. The primary distinguishing feature of the MXR-1001 is the ability to raise and retract the touch panel.
Therefore, there are electrical and firmware features specific to the MXR-1001 that provide control of the motorized mount. The
MXR-1001
Motor Controller
reports the physical state of the motor and panel to the NetLinx Master.
Powering On/Off the MXR-1001 Touch Panel
MXR-1001 touch panels may be powered on by touching the
Sleep/Settings
pushbutton (just like other G5 touch panels). The
Sleep/Settings
pushbutton is located in the in the center of the top panel of the touch panel (FIG. 2):
The MXR-1001 also supports power-up via PoE signaling, but note that PoE is not a power supply option for the MXR-1001.
To power off the panel, press and hold the button to invoke the on-screen menu, and select
Power Off
(FIG. 3):
If the device has gone into its Sleep mode, touching the touchscreen or pressing the Sleep button will reactivate it.
Press and hold the Sleep button to access the Settings menu.
NOTE:
Powering off the touch panel does not remove power to the motor. To completely remove power from the motor and touch
panel, unplug the power cable (located on the Motor Mount).
FIG. 2
MXR-1001-BL Sleep/Settings Pushbutton
FIG. 3
On-screen menu Power Off/Settings options
Sleep/Settings pushbutton
Press to power off the panel
Press to access the Settings menu