![background image](http://html1.mh-extra.com/html/amx/keypadbuilder/keypadbuilder_manual_2938926094.webp)
Program Reference
82
KeypadBuilder v2.1
Communication Settings dialog window
Use the options in this dialog to configure and save new communications settings, or to edit a saved
communications configuration. The options in this dialog include:
Platform Selection
- Select the platform type by clicking the appropriate radio button
(NetLinx Master, Axcess Master)
Transport Connection Option
- Select a transport type by clicking the appropriate radio
button (Modem, Serial or TCP/IP).
Edit Settings
- launches the
Edit Settings
dialog window.
Authentication Required
- Click the
Authentication Required
checkbox to enable the
User
name and Password
button
Edit Settings dialog window
Edit Settings
- This window contains communication parameters specific to the selected transport type.
If you selected
Modem
, the parameters are
COM Port
,
Data Bits
,
Parity
,
Baud Rate
,
Stop Bits
,
Flow control
and
Phone Number
.
If you selected
Serial
, the parameters are
COM Port
,
Data Bits
,
Parity
,
Baud Rate
,
Stop Bits
and
Flow control
.
If you selected
TCP/IP
, the parameters are
IP Address/DNS Name
and
IP Port
. The IP Port
should always be set to 1319 (default). Do not change this number. TCP/IP connections also
feature the option to ping the NetLinx Master to ensure availability (default = enabled; disable
if Master is behind a firewall that blocks ICMIP ping messages).
User Name and Password dialog window (for NetLinx Master)
Authentication Required
- If the target NetLinx Master has authentication enabled, you are prompted
to enter a User Name and Password in order to establish a connection. Click the
Authentication Required
checkbox to enable the
User name and Password
button; click the button. Enter the User Name/
Password combination to save them as part of this configuration. Once they are entered here, you will be
able to establish this connection without having to type the authentication information each time you
connect. Refer to the NetLinx Studio (v2.3 or higher) online help for details on enabling authentication
on NetLinx Masters.
TCP/IP is only available for NetLinx masters.
Summary of Contents for KEYPADBUILDER
