12
USER MANUAL - DUX-MTX
100-METER HDBT EXTENDER TRANSMITTER
INSTALL HARDWARE
WARNING:
Before installation, disconnect the power supplies of all the devices.
Please use quality cables and accessories specified or provided by the
manufacturer.
During installation, connect and disconnect cables with caution.
To install DUX-MTX (See Application Example: System Wiring on Page 13):
1. Connect DUX-MTX’s
HDMI IN
or
VGA IN
to an HDMI or VGA input source (e.g.
Blu-ray player, game console, satellite/cable TV, computer, media server, etc.)
through a quality HDMI or VGA cable. (
AUDIO IN
may also be connected when
VGA IN is in use.)
2. Connect DUX-MTX’s
HDBT OUT
to an HDBT Receiver (e.g. DUX-RX) via a high-
quality CatX cable.
3. Connect an HDMI display device (e.g. TV or projector) to HDMI OUT of the HDBT
Receiver.
4. Connect IR Broadband Receiver to
IR IN
and IR Emitter to
IR OUT
of DUX-MTX.
5. Connect IR Broadband Receiver to
IR IN
and IR Emitter to
IR OUT
of the HDBT
Receiver.
6. Connect the included power adapter to DUX-MTX.
7. Power on all the devices and start operation.
NOTE:
1) When transmitting an Ultra HD signal, please ensure all the source and display devices are 4K
compatible by checking their respective input and output compatibility.
2) 70m/230ft @4K or 100m/328ft @1080p are maximum transmission distances realizable
when DUX-MTX and other devices are in perfect conditions and the straight cable runs with no
electrical interference, bends, kinks, patch panels or wall outlets, etc. If any of these turns to be
an issue in your installation, transmission distance will be affected.
3) When all set, check the LED indicators of DUX-MTX. For LED indication, please refer to page
08.