![background image](http://html1.mh-extra.com/html/amx/dgx-aie/dgx-aie_hardware-reference-manual_2939028215.webp)
Integrated Master - NetLinx Programming
215
Enova Digital Media Switchers - Hardware Reference Manual
Standard Input SEND_COMMANDs (Cont.)
Command
Description
?VIDIN_FORMAT
Requests the input format of the video port addressed by the D:P:S.
Syntax:
SEND_COMMAND <DEV>, "'?VIDIN_FORMAT'"
Variable:
• Format = HDMI, DVI, S-VIDEO, COMPONENT, COMPOSITE, VGA (for Multi-Format inputs)
Example:
SEND_COMMAND VIDEO_INPUT_1, "'?VIDIN_FORMAT'"
Returns a COMMAND string of the form:
VIDIN_FORMAT-<format>
?VIDIN_HDCP
Requests the video input HDCP compliance setting of the specified video input port.
Syntax:
SEND_COMMAND <DEV>, "'?VIDIN_HDCP'"
Example:
SEND_COMMAND VIDEO_INPUT_1, "'?VIDIN_HDCP'"
Returns a string of the form:
VIDIN_STATUS-<ENABLE|DISABLE>
VIDIN_HDCP
Sets the video input HDCP compliance setting of the specified video input port.
• VIDIN_HDCP commands for Solecis switchers must be sent directly to the Solecis unit, not sent via the
5002 device.
• When VIDIN_HDCP is disabled, the addressed video input will appear to any source as not being
HDCP compliant.
For computer sources that encrypt all video when connected to an HDCP compliant display, disabling
HDCP compliance on the input will cause the computer to send non-encrypted video which can then
be routed to non-compliant displays and video conferencing systems.
It may be necessary to disconnect and re-connect PC sources after changing this setting.
Note: Disabling HDCP compliance for sources that do not support non-compliant displays (such as DVD
and Blu-Ray players) is not recommended and may affect the source’s ability to send video.
Syntax:
SEND_COMMAND <DEV>,"'VIDIN_HDCP-<option>'"
Variable:
option = ENABLE, DISABLE (default = ENABLE)
Example:
SEND_COMMAND VIDEO_INPUT_1,"'VIDIN_HDCP-ENABLE'"
Enables the HDCP compliance of video input port #1.
?HDCPSTATUS
Request the video input encryption status addressed by the D:P:S
Syntax:
SEND_COMMAND <DEV>,"'?HDCPSTATUS'"
Example:
SEND_COMMAND VIDEO_INPUT_1,"'?HDCPSTATUS'"
Returns a COMMAND string of the form:
HDCPSTATUS-<status string>
status string = ENABLE, DISABLE, or ERROR.
?VIDIN_NAME
Requests the input name of the specified video port.
Syntax:
SEND_COMMAND <DEV>,"'?VIDIN_NAME'"
Example:
SEND_COMMAND VIDEO_INPUT_1,"'?VIDIN_NAME'"
Returns a COMMAND string of the form:
VIDIN_NAME-<name>
VIDIN_NAME
Sets the name of the specified port to <name>. The Input name may be changed using either the
VIDIN_NAME or AUDIN_NAME command. Both commands are used to change the same name attribute
and do not create separate names for video or audio.
The <name> length is limited to 31 characters. Specifying a longer name will result in truncation to the 31
character length limit. Valid characters are:
• a-z (lower case letters)
• A-Z (upper case letters)
• 0-9 (numeric)
• #.-_=+ (special characters hash, period, dash, underscore, equal, plus <space> [space characters at
the beginning of a name are truncated])
Syntax:
SEND_COMMAND <DEV>,"'VIDIN_NAME-<name>'"
Variable:
• name = A string name (e.g., PC 1)
Example:
SEND_COMMAND VIDEO_INPUT_1,"'VIDIN_NAME-MyPC'"
Sets the name of input port (#1 based on D:P:S) to MyPC. This is used for the On Screen Display
feature.