AMX AXU-SPL4, Instruction Manual

Page: 11 / 20

Installation and Wiring
7
AXU-SPL4 Mini-LCD Panel
5.
Attach the panel to the BB-SPL4, using a screwdriver, and tighten.
6.
Insert the cover plate into the magnetic bezel.
Three-gang wall box
To install the AXU-SPL4 into a three-gang box:
1. Mount the three-gang wall box. Minimum dimensions (HWD) are 5.38" x 2.88" x 2.00"
(13.67 cm x 7.32 cm x 5.08 cm).
2. Attach the panel to the three-gang wall box using machine screws.
3. Insert the cover plate into the magnetic bezel.
Finished surface
To mount the AXU-SPL4 to a finished surface:
1.
Cut out the finished surface according to the cutout dimensions in FIG. 6.
2.
Place the panel over the cutout and mark the screw positions.
3.
Attach the panel to the finished surface using wood or machine screws according to surface, as
shown in FIG. 7, FIG. 8, and FIG. 9, on the following pages.
4.
Insert the cover plate into the magnetic bezel.