Anterus Configuration Manager
15
Anterus RFID Solution
Anterus Configuration Manager
Overview
The Anterus Duet Module interfaces ANT-RDR Readers with NetLinx controllers, and adds the Anterus
Configuration Manager to the NetLinx Master’s built-in web console. The Anterus Configuration
Manager allows you to configure the Reader and all Tags in the Anterus solution via a web browser on
any PC that has access to the NetLinx Master to which the ANT-RDR is connected.
A sample UI module and a touch panel file are provided in the module package. These are not intended
to cover every possible application, but can be expanded as needed to meet the requirements of a
particular installation. Refer to the documentation supplied with the Anterus Duet Module for more
details.
Accessing the RFID Configuration Manager
From any PC that has access to the LAN that the NetLinx Master to which the ANT-RDR is connected:
1.
Open a web browser and type the
IP Address
of the target NetLinx Master in the browser’s Address
Bar.
2.
Press
Enter
to access the Configuration Manager for the specified NetLinx Master.
3.
The initial view is the Master’s
Master Configuration Manager
page -
WebControl
tab (FIG. 14).
The Anterus solution will also work without the Duet module, and all web
configuration may be done with Send Commands, Channels and Levels. Refer to the
Programming
section on page 27
for detailed programming information.
If the specified NetLinx Master requires authentication, you will have to provide a
valid Username and Password to proceed.
FIG. 14
Master Configuration Manager page - WebControl tab
