Before checking for leakage, make sure the collar of the cartridge is
tightened. If there is leakage, shut the tap immediately and reinstall.
eSpring Installation & Maintenance Guide
Attention
Step 4 : Checking for leaks
Page 8
Turn on the tap and switch
the diverter handle to treated
water position.
Check for any signs of leakage
at all tubing connections.
Check at the connection with the
diverter. After checking, flush for
5-15 minutes, to remove air pocket
and carbon dust. Lastly, switch the
diverter handle to the untreated
water position, then turn off the tap.
