DXZ4 security edition zero client
Page 16
2.2 Rear panel features
shows the following rear panel features:
1.
Network port (RJ45)
: The DXZ4-A has two RJ45 sockets. You
only need to use one network connection. You can use the
other network connection as an outlet port for connection
to other networked devices or as a second network input to
provide redundancy (if the LAN spanning tree is active). For
details about dual redundant network connections, see
Dual redundant network connections on page
.
2.
Network LEDs
: Each network port has an upper and lower
network status LED: See
3.
Video outputs 1 to 4
: DisplayPort connectors.
By default, the On Screen Display (OSD) displays on
the monitor connected to video output 1.
You can specify a different video output as the OSD default
by changing the configuration in the Display Topology screen.
4.
Rear panel USB ports
: Use these two ports to connect any
USB devices, including keyboard and mouse.
5.
Audio socket
: Stereo line out or speaker output on a
3.5mm jack.
6.
Feature connector
: Reserved for future use. Do not connect
devices to this socket unless instructed to do so by Amulet
Hotkey technical staff.
7.
Locking DC inlet
: You must only use the approved PSU.
8.
Network port (SFP module)
: The DXZ4-AM has two sockets
that accept an SFP module. See the
for the
modules available separately from Amulet Hotkey.
Figure 8:
Rear.panel.features
