AMTC RemoteLink AV Digital Media Player Installation and Operation Guide 11/07/2016 Page 12
Allows you to adjust the output level of both the LINE OUT and AMP OUT connections, using the
small Phillips screwdriver provided.
ii.
Make connections as follows:
To a sound system:
4. Connect External Audio
The RemoteLink AV may be used in conjunction with an external music source. Used in this mode, the player
periodically mutes the external music source, plays an audio or video file, and then restores the external music source
to its previous level. The player will repeat this process using all of the files in its memory, and then return to the
beginning of the files and repeat the process. The duration of the interval between files is set via the Portal.
If an external music source will be used, connect an audio cable
from the external music source to the player’s AUDIO
IN connector in the area labeled EXTERNAL AUDIO using a 3.5mm mono male connector.
LEVEL allows you to adjust the input level of the external audio source, using the small Phillips screwdriver provided.
5. Connect Power
Connect the provided power adapter to a wall outlet and to the connector labeled 12VDC 2A. Avoid using any circuit
that is also powering any heavy equipment or appliances, particularly air conditioners, microwaves or refrigeration
equipment. We highly recommend that you use a quality surge protection device to protect your player. The
STATUS lights will turn green showing it has access to the internet. NOTE: No action is required in the event of a
power failure. The
player’s internal memory will not lose its contents. When power is restored, the player will resume
its operation.
Assuming your audio output connection(s) is(are) correct, when you connect power you should hear a small boot
jingle. Soon the player will start playing your selected content. If you have connected through HDMI to a monitor you
will see the AMTC logo, followed player boot status:
.
If the described sequence does not occur, you will need to connect a monitor to the HDMI port.
Activation
To activate your player, log into your AMTC account. In the Media Players section of the Devices tab, locate your
player. A hollow green circle should appear to the far right side of the player’s row on the grid, which indicates that
