Features
1. MIC 1 input with front- and rear-panel connectors
2. Rear-panel MIC 2 input
3. Rear-panel AUX input
4. Line-level outputs allow connection to another amplifier
5. 100V and 70V constant-voltage speaker outputs and 4-16 ohm constant-
resistance speaker output
6. Commercial-grade toroidal transformers produce high performance audio on a
wide range of frequencies with minimal noise and high fidelity, even at high
volume
7. Intelligent limiter can reduce excess signal
8. Reliable protection against overload, short circuit, and power fluctuation for
optimum reliability
9. Oversized heat sinks protect against overheating, protecti
ng the amplifier’s
working life
10. Interrupt feature mutes AUX input when signal is detected on the MIC 1 input -
speed of restoration of AUX input may be adjusted from sharp to gradual
11. Phantom power available on MIC 1 Input for condenser-type microphones
Specifications
Pre Amp Out: 0 bBV / 600 Ohms
Total Harmonic Distortion: < .5%
Line Level Output: -10 dBV / 3k Ohms
Operating Temperature: 14º F (-10º C) - 104º F (40º C)
AUX Level Input: 300 mV/ 10k ohms
MIC Level Input: 5 mV/ 2k ohms unbalanced / 2.5V / 1k ohms balanced
Cooling Mode: Air Cooling
Power Source: 100-120 VAC / 60 Hz
Power Consumption: 80 W
Amplifier Section (Amp in @ 1 kHz, 8 ohm load output):
Rated Continuous Output Power (THD 1%): 40 W
Rated Maximum Output Power (THD 1%): 60 W
Input Sensitivity/Impedance: 1V / 20k ohms
S/N: Better Than 90 dB
