Transmitter / Receiver IR Quick Sync
With the receiver in normal operating mode, and the TRANSMITTER OFF, push and hold the SET
button on the receiver to sync the transmitter to the receiver. While the receiver is sending the signal,
turn the transmitter ON. If, for some reason, your transmitter is not on the same channel from the last
usage, you can use the IR Quick Sync method to quickly sync the transmitter without having to page
through the group and channel setting functions.
Transmitter Sync’ing
When sync’ing the transmitter, it is best to power the transmitter OFF first, then power the
transmitter on while your sending the sync from the receiver. This procedure will re-set the
transmitter, allowing for it to sync to the newly selected channel before it locks / syncs to a
channel on the receiver.
Specifications:
Receiver
Frequency Preparation: PLL Synthesized Control
Frequency Range: 600-952MHz
(
Region dependent
)
Frequency Type: F3E
Modulation Type: FM
Channels: 100(10x10)
Oscillation System: VCO
Type of reception: True Diversity
Receive Sensitivity: -11dBm (sinad
≥
30dB)
Frequency Response: 60Hz-17KHz+/-3dB
S/N Ratio:
≥
105dB
T.H.D: <0.5% at 1KHz
Dynamic Range: >100dB
Operating Temperature: -10-+50
℃
Display: Backlit LCD (63mm*22mm)
Audio Output: 1*Balanced XLR Socket 1*6.35mm Jack
Antenna: 2*BNC
Power Supply: DC12V-18V/500mA
Dimensions( L*W*H): 210*170*44mm