1.
Microphone head with cartridge inside
2.
Metal pipe (Aluminum alloy)
Anodize any different colors, never fade.
3.
Backlit LCD
Display group, channel, frequency and battery life.
4.
IR infrared port
Receiver infrared beam to synchronize frequencies, hold the transmitter with its IR port facing
directly towards the receiver’s IR port with a distance between 5-20cm.
Note:
When using multiple systems, only one transmitter IR port should be sync’d at a time.
5.
ON/OFF and Mute switch
Push up the switch to turn on, Mute at the mid position.
6.
Battery compartment
To replace batteries, unscrew the bottom pipe part counter-clockwise, make sure to put the
battery in the right polar directions.
7.
Caps-on (three different choices)
Body-pack Transmitter
