Global Settings
39
MIDI Channel
Pangaea uses one of 16 MIDI channels to communicate with other devices over MIDI. In
order for this communication to be successful
both devices shall use the same channel.
To change MIDI channel used to send and
receive MIDI messages, go to the system menu
and adjust
Midi ch
parameter.
MIDI Mapping
As it was mentioned before, you can use
Pangaea to control external devices over
MIDI. Mapping gives you more flexibility. It
allows you to modify incoming MIDI Program
Change (PC) message before recalling a preset
or forwarding it to another device via
MIDI Out
.
To configure MIDI mapping scroll down to
MIDI PC Map
in the system menu. Inside
you’ll find 128 pairs with the incoming PC
on the left and the value assigned to it on the
right.
To make it simple, let’s say all presets have
PC Out
parameter set to
MAP
. Then
1 -> 3
means that when PC=1 is received, preset 3 will be recalled and PC=3 will be sent to
MIDI
Out
. If preset 1 is recalled by means of built-in footswitches or
Navigation/Confirm
knob,
PC=3 will be sent to
MIDI Out
. As opposite to that, if all presets have
PC Out
parameter
set to
MIDI IN
, any incoming PC message will be forwarded to
MIDI Out
unmodified
(PC=1) while Pangaea’s presets will still be recalled according to the
MIDI PC Map
.
Mode CabSim On
Midi ch
1
Cab num 2 L+R
Expression On >
SY
1 -> 3
Foot Switch
S/PDIF Main Output
MIDI PC Map
Tempo Preset
SY
