www.amtelectronics.com www.amtelectronics.com
3 3
CONTROLS
FRONT PANEL
1.
Guitar preamp operation indicator.
2.
LEVEL –
controls the output volume level of the preamp.
3.
OUT
– for connection to the power amplifier’s input.
4.
CAB.SIM.
– for connection to Line Input of a mixer
5.
LOW
– sets the low frequencies level.
6.
MID
– sets the middle frequencies level.
7.
HIGH
– sets the high frequencies level.
8.
IN
– for guitar connection.
9.
GAIN
– sets the guitar preamp sensitivity level.
10.
FOOTSWITCH –
switches between PREAMP / BYPASS.
Right Panel
11.
Power adapter connector.
12.
Bottom cover of the guitar preamp.
WARNING! All connections must be made only when the guitar
preamp has been SWITCHED OFF (BYPASS” mode)!
Only for qualified personnel
There are no user-serviceable parts inside the device. The device
must be repaired only by qualified specialists. If the device has
not been used for a long time, it is necessary to remove the
battery from the device.
To avoid any possible damages or injuries related to inflammation
or electric shock, do not let any foreign objects get inside the
device.
Battery installation (replacement)
Only use replacement batteries recommended by the manufacturer.
To install (replace) a battery:
1.
Remove the bottom cover of the guitar preamp (12) by means of
unscrewing 4 (four) screws.
2.
Remove the old battery and disconnect it from the device.
3.
Connect the new battery to the device and replace it.
4.
Replace the preamp bottom cover and fasten it by means of the 4 (four)
screws.
AUDIO CONNECTIONS AND SWITCHING
CAUTION! All connections are to be carried out only w
eamp has been disconnected from the mains. (BYPASS
mode
)!!
hen
the pr
The diagrams of possible audio connections of the E-1 guitar preamp with
external devices:
One-channel connection version
Two-channel connection version.
