- 40 -
Direction
The direction setting value is either 1 or 0. Use this item to setup
the printout direction.
0
Print mode
This item is used to set the print mode. There are 6 modes as
below,
Batch
Mode
Offset
This item is used to fine tune media stop location. Available
setting range values are from -999 dots to 999 dots.
0 dot
Shift X
This item is used to fine tune print position. Available setting
range values are from -999 dots to 999 dots.
0 dot
Shift Y
0 dot
Reference X
This item is used to set the origin of the printer
s’ coordinate
system horizontally and vertically. Available settings range
from 0 dot to 999 dots.
0 dot
Reference Y
0 dot
Code page
Use this item to set the code page for international character set.
850
Country
Use this option to set the country code. Available setting
values range from 1 to 358.
001
Note: If printing from a driver, the driver will send out the commands, which will
overwrite the settings made from the printer panel.
DIRECTION 0
DIRECTION 1
F
EE
D
Printer Mode
Description
None
Next label top of form is aligned with the print head
burn line location. (Tear Off Mode)
Batch Mode
Once image is printed completely, label gap/black
mark will be fed to the tear plate location for tear off.
Peeler Mode
Enable the label peel off mode.
Cutter Mode
Enable the label cutter mode.
Cutter Batch
Cut the label once at the end of the printing job.
Rewinder
Mode
Enable the label rewinder mode.