AMT Datasouth Fastmark M5 Plus Series User Manual Download

Page: 37 / 42

Document #120522 Rev-A

7. LED and Button Operation

7.1 LED

LED Color

Description

Green

/ Solid

This illuminates that the power is on and the device is
ready to use.

Green

/ Flash

This illuminates that the system is downloading data
from PC to memory and the printer is paused.

Amber

This illuminates that the system is clearing data from
printer.

Red

/ Solid

This illuminates printer head open, cutter error.

Red

/ Flash

This illuminates a printing error, such as head open,
paper empty, paper jam, ribbon empty, or memory error
etc.

7.2 Button Operation

Feed

Press the button when the LED is

green

It feeds the label to the beginning of the next label.

Pause

Press the feed button during printing

The printing job is suspended.

Summary of Contents for Fastmark M5 Plus Series











































Search results

Summary of Contents for Fastmark M5 Plus Series

Reviews:

Related manuals for Fastmark M5 Plus Series

Brands by name

Popular brands

AMT Datasouth Fastmark M5 Plus Series, User Manual

Search results

Summary of Contents for Fastmark M5 Plus Series

Reviews:

Related manuals for Fastmark M5 Plus Series

Brands by name

Popular brands