manualshive.com logo in svg

AMT Datasouth Fastmark M10XPd/Gen-2, User Manual, Page: 64 / 72

Share
Download
AMT Datasouth Fastmark M10XPd/Gen-2 User Manual Download Page 64

- 55 - 

 

 
 
 
 
 
 
 
 

 

Printhead 
Maintenance

 

This item is used to check printhead status and to set the 
settings for printhead care. 

 
 
 
 
 
 
 
 
 

 

N/A

 

 

Item

 

Description

 

 

 
 

Warning 

This item is used to enable/disable the 
clean printhead warning. If enabling this 
feature, once the printhead has reached 
the set mileage then the warning icon 
will be shown on printer UI for reminding 
the user to clean the printhead. The 
default setting is disable. 

 

Reset 
Counter 

This item is used to reset the clean 
printhead warning mileage after 
cleaning the printhead. 

 

 

Interval 

This item is used to set the expected 
mileage for reminding user to clean the 
printhead. You have to enable the “TPH 
warning lock” to use. The default setting 
is 1 km. 

Key sound 

This item is used to enable/disable the 
sound of front panel buttons. 

 

Contact us

 

This feature is used to check the contact information for 
tech support service 

 

N/A

 

 

7.7

 

File  Manager

 

 

 

This feature is used to check the printer

s’ available memory, show the files list, delete the files or run 

the files that are saved in the printer DRAM/Flash/Card memory. 

 
 
 
 

 

DRAM 

 

Menu 

File Manager 

FLASH 

 

CARD 

Summary of Contents for Fastmark M10XPd/Gen-2









































































Reviews:

No comments