3
Starting Up
1
Open pump cover. Place the silicone
loop around the rotor and make sure the
cassette is in the right direction.
Push the cassette in the middle of the
pins with your thumb and make sure the
cassette is well positioned between the two
black pins.
Guide both tubes down, in line with their
respective slots.
Close the pump cover, then place the
adapter into the designated slot.
Remove the protective cap from the distal
connector (end of downstream tube that
goes on the patient’s feeding tube).
Launch automatic priming (see step 3).
Connect the tubing to the patient enteral
feeding tube and program the pump.
Installation of the Tubing
Turn on the PUGGLE™ pump by holding the
on/off button [ ] until a beep is heard.
2
Switching on the Pump
Menu
