American Security Products Co.
ESL15 Operating Instructions
Released Aug. 9, 2018
Revision A
Page 7 of 10
o
To Enable 2 Subordinate User Opening in Dual Combo Mode:
C - # - 31 - # - (Master Code) - # - 1 - #
o
Disable 2 Subordinate User Opening in Dual Combo Mode:
C - # - 31 - # - (Master Code) - # - 0 - #
Armored Car TDL Bypass (Functions 40 & 41)
o
To Enable Armored Car TDL Bypass:
C - # - 40 - # - (Master Code) - # - 1 - #
Note: Enabling Armored Car Bypass turns on (enables) User 9, which is the Armored Car User. The User
9 combo must be set before this feature will function. See Section 4 for changing instructions.
o
To Disable Armored Car TDL Bypass:
C - # - 40 - # - (Master Code) - # - 0 - #
o
To Enable Subordinate Authorizing User Armored Car TDL Bypass:
C - # - 41 - # - (Master Code) - # - 1 - #
o
To Disable Subordinate Authorizing User Armored Car TDL Bypass:
C - # - 41 - # - (Master Code) - # - 0 - #
Subordinate User Combo Change (Function 60)
o
To Enable Subordinate User Combo Change:
C - # - 60 - # - (Master Code) - # - 1 - #
o
To Disable Subordinate User Combo Change:
C - # - 60 - # - (Master Code) - # - 0 - #
Reset All Functions (Function 99)
o
To Reset All Functions:
C - # - 99 - # - (Master Code) - # - 1 - #
Mixed Modes
Any combination of modes can be active at the same time. Here are some situations that are possible and how they
interact together.
o
Dual Combo and Time Delay: Any one valid combo can start the Time Delay, but after the Delay Period, two
different valid combo’s are necessary to cause lock opening.
o
Armored Car Code, Dual Combo and Time Delay: Armored Car TDL Bypass only allows the bypassing of Time
Delay. Two valid User codes are still necessary to open the lock even the when Armored Car Code is used to
bypass Time Delay.
o
Duress Alarm output will be caused any time the Duress code is entered by any User during opening or starting
of Time Delay. Requires Expansion Module.
o
Enabling Dual Combo Mode automatically adds a User 1, even if Multi-User Mode is disabled. Don’t forget to
set a Code for User 1 or there will not be two codes to open the lock.
