AFDM1080 User Guide
5
amscope.com
Setup
Using Support Systems
The AFDM1080 can be used with support systems which use 50mm or 76mm mounting collars. By itself the microscope
can be mounted to a 50mm collar by sliding the lens into the collar.
To mount the AFDM1080 to a 76mm collar, either the RLAFDM ring light must be attached, or a mounting adapter such
as the AD-SZ76 must be used. When attaching the RLAFDM ring light, be sure to align the electrical pins with the inter
-
face on the base of the microscope.
Once the ring light is fully seated, locate the two hex screws on the side of the ring light, and tighten them using a 1.5mm
hex wrench. With the ring light secured, the microscope can be inserted into a 76mm collar.
