TSL2541 EVM User Guide
Page 10
Figure 10. ALS Data Plot
The scale of the Y-axis of the plot can be adjusted by clicking on the small up and down arrows at
the top left corner of the plot. The scale can be set to any power of 2 from 64 through 65536.
Click the
Clear Plot
button to discard the current data and continue plotting the new data. Note if
the Clear Plot button is clicked while the plot is disabled, the data is discarded, but the actual plot
will not be updated until the plot function is re-enabled.
5
Resources
For additional information regarding the TSL2541, please refer to the datasheet. For information
regarding the installation of the TSL2541 EVM host application software please refer to the
TSL2541 EVM Quick Start Guide.
Designer’s Notebooks dealing with various aspects of optical measurement and optical
measurement applications are available. All content is available on the
ams
website
Addition Resources:
TSL2541 Datasheet
TSL2541 EVM Quick Start Guide (QSG)
TSL2541
EVM User’s Guide (this document)
TSL2541 EVM Schematic_Layout
