14
Technical data
Alarm volume
Relay output
12 V DC output
Reset
Operating temperature
Humidity
Digital display
CE conformity
Type test
Dimensions
Protection level
85 dB (A) / 1 m
potential-free changeover contact,
5A/230V AC, 5A/30V DC
switched when an alarm goes off,
12 V DC (±10%), max. 200 mA
automatic if CO concentrations fall below
the alarm threshold
-10°C to +40°C
max. 95% rel.
3 digits / 7 segments, reference value display
Deviation max. ±20% at 300 ppm CO
EN 61000-6-3:2007
EN 50270:2006
EN 50291-1:2010 + A1:2012
140 x 125 x 42 mm (W x H x D)
IPX2D
230 V model:
Operating voltage:
230 V AC / 50 Hz
Power consumption: max. 6 VA
Weight:
approx. 500 g
Protection class: II
12 V model:
Operating voltage:
12 V DC (-15% / +20%)
Current consumption: max. 100 mA
Weight:
approx. 250 g
Protection class: III
Safety information
The carbon monoxide alarm may only be installed by a person who is properly
qualified.
Only operate the CO alarm with the operating voltage specified for the device.
This device is only suitable for indoor use. Keep away from moisture.
Modifications made to the CO alarm can result in electric shock or malfunction.
If the mains power cable of this device is damaged, it must be replaced by the
manufacturer or his customer service department or a similarly qualified person in
order to avoid hazards.
Do not open the device. Opening the device voids all guarantee claims.
Alarm threshold / sensitivity:
Carbon monoxide (CO) 50 ppm between 60 and 90 minutes
100 ppm between 10 and 40 minutes
300 ppm less than 3 minutes
