AMS 39-VRM Operation And Service Manual Download Page 47

Page: 47 / 50

AMS SENSIT II GLASS FRONT VRM VENDOR

L0086, Rev. D

11-1

11.0 OPTIONAL EQUIPMENT

Part No. 21565 – Kit, 1.5” Helix Tray, Reduced Depth (39”)

A four-selection helix tray that mounts below the bottom tray.

Part No. 20449 - Kit, Candy Pusher

The candy pusher is an adjustable bar that mounts to any tray divider to keep tall candies from falling sideways.

Part No. 20450 - Kit, Helix Splitter

The helix splitter is a plastic divider that can be inserted into a small helix to divide each coil into two product

openings, thereby doubling product capacity. The helix splitter works best with narrow products such as Life Savers.

Part No. 20535 - Kit, Cup Rail, Small Helix

Part No. 20536 - Kit, Cup Rail, 4” Helix

Part No. 20723 - Kit, Cup Rail, 3” Helix

The cup rail is a flat plastic bar that can be placed inside the helix to provide a flat surface for rigid flat-bottomed

packages that otherwise do not stay upright when placed in a helix. Examples would be drink boxes or bottles, or individual
serving cups of soup, pudding, etc.

Part No. 20664 - Kit, Banking Spacer

Part No. 21166 - Kit, False Leg

False leg to be installed on all machines having 2 or more bottle trays to prevent machine tipping during loading.

Failure to install the false leg could result in serious injury.

P/N 3302, AMS Sensit II Utility CD
P/N 20786, Harness, Chip Programming

Load Sensit II software into the vendor, configure the vendor software, and/or download files using the AMS Utility

software, the cable and the vendor software

Summary of Contents for 39-VRM



















































Search results

Summary of Contents for 39-VRM

Reviews:

Related manuals for 39-VRM

Brands by name

Popular brands

AMS 39-VRM, Operation And Service Manual

Search results

Summary of Contents for 39-VRM

Reviews:

Related manuals for 39-VRM

Brands by name

Popular brands