background image

AS5045 12-BIT PROGRAMMABLE MAGNETIC ROTARY ENCODER  
Adapter PCB Operation Manual

 

Revision A.02, 14-Mar-07                                     www.austriamicrosystems.com   

Page 7 of 12 

 

8

 

AS5045 Demoboard  

The AS5045 Demoboard is a complete rotary encoder system with built-in microcontroller, USB interface, 4-digit 
7-segment display, a LED displaying the PWM output and two magnet status LEDs. 

 

It also supports external AS5045 applications, such as the AS5045 adapter PCB or in-system AS5045 customer 

applications that can be connected to the demoboard and displayed, modified and permanently programmed 
using the AS5045 Demoboard Software. 

 

The AS5045 demoboard can be used in several ways: 

8.1.1

 

as standalone unit supplied by a 9V-battery 

Connect a 7,5V..12V supply to pins "GND" and "+9V" at the right side of the board. No other connections are 
required 

 

8.1.2

 

as standalone unit supplied by an USB port 

Connect the demoboard to a PC using a USB cable (included in demoboard shipment). The board is supplied by 

the 5V supply of the USB port. No other connections are required 

8.1.3

 

as input device for the AS5045 demoboard software 

This configuration uses the same hardware connection as 8.1.2, but additionally the AS5045 demoboard software 

is running. All indicators on the demoboard will be displayed on the PC screen as well. 

  

 

Figure 8: AS5045 demoboard and Adapter PCB 

ams 

AG 

Technical 

content 

still 

valid

Summary of Contents for AS5045














Reviews: