Amron 8225-HP Instruction Manual Download Page 12

OPTIONS 

OPTIONS 

4.1 

 
Model 2821-28 Walk-and-Push-to-Talk (2-Wire Operation) 

 

AMRON headset extension (remote walk and talk), with push-to-talk belt module, jacks for headset, 
25 feet 1/4" O.D. cable.  (Use with Model 2460-28 headset with boom microphone). 
 
 

Model 2822-28 Remote Walk-and-Talk (4-Wire Operation) 

 

AMRON headset extension (remote walk and talk), with belt module, jacks for headset, 25 feet 1/4" 
O.D. cable.  (Use with Model 2460-28 headset with boom microphone). 
 
 

Model 2460-28 Headset 

 

Headset with boom microphone and color-coded dual banana plugs to mate to color-coded inputs on 
Amron communicators and accessory items. 
 
 

Model 2829-01 Wireless Kit with Case

 

 

Wireless kit comes standard with a remote tender transceiver, wireless headset, wall charger, and 
case.   
 
 

Model 2829-04 Wireless Headset

 

 

Wireless Headset with single ear muff and boom microphone.  Full Duplex, includes voice-actuated 
transmitter.   
 
 

Model 2405-28 Hand Held Microphone 

 

Noise Canceling Hand Held Push to Talk Microphone. 
 
 
 

Model SAA5300 300 Bar DIN Adapter 

 

Converts a standard Amron CGA850 Yoke (3000 PSI) to 300 Bar DIN (4500 PSI) use. 
 
 
 

8

 

Summary of Contents for 8225-HP



















































































Reviews: