4.5 Cleaning Robot’s Floor Tracking
Sensor
Use a clean, dry microfiber or soft cotton cloth to wipe any debris that has
accumulated in the round sensor opening on the right side of the bottom
surface.
Do not spray cleaning solution directly into the sensor entrance.
4.6 Cleaning Robot’s Rolling Brush
1
Pull on the release tabs to unlock the brush guard as shown.
2
Lift the rolling brush to remove.
3
Clean the rolling brush with the provided cleaning tool or a
vacuum cleaner.
4
Reinstall the rolling brush by inserting the fixed protruding
end first and then clicking into place.
5
Press down to snap the brush guard into place.
21
Summary of Contents for SI-350
Page 1: ...Amrobt Sweeping Robot Product Manual...
Page 2: ......
Page 31: ......
Page 32: ...Model SI 350 E mail customerservice Amrobt outlook com...
