Amroad ID5101-FF, Manual

Page: 69 / 92

VIDEO INDOOR STATION
AMROAD TECHNOLOGY INC.
61
Safety & Security
Device Setting
This page is used to configure Safety and Security devices.
There are 8 Input ports (DI1~DI8) and 4 Output ports (DO1~DO4)
available on ID5101 GPIO module.
Moreover, DI1-DI4 are for MS (Magnetic Sensors), DI5-DI8 are for CO
sensor, Emergency Button, and Gas detector.
DO1-DO3 are for Lighting, Lighting, Alarm. (DO4 is reserved).
ITEM Description
Device Name In the drop-down menu, select the device name
that your ID5101’s GPIO port is connected to.
Triggered By For 8 Input ports only, user may select “Positive” or “Negative”.
NOTE: This means user can define the light status (Green or Red) on your ID5101 Safety
Sub-menu.
En/Disable Select “Enable” or “Disable”
User may select “Disable” when the ID5101’s GPIO port is not connected to any device.
NOTE: If user doesn’t install some safety device, we suggest SI select “Disable” so that the safety device will be
displayed as gray light on ID5101.