Amroad ID5101-FF, Manual

Page: 38 / 92

MANUAL FOR SYSTEM INTEGRATOR
AMROAD TECHNOLOGY INC.
30
These pages allow user to view statuses of safety devices. User can press
Exit soft-function key to go back to previous screen.
Security Group
Your registered RFID cards can be used to set Security (Area A, B, C, and D)
On/Off. And, Security of four areas (Area A, B, C, and D) will be set On/Off at a
time. (For more information, please refer to RFID Card in Chapter 3 .)
However, Security Group lets you set individual security area’s Security On/Off,
and allows you to Disable/Enable Safety (including CO Detector, Emergency
Button, and Gas Detector).
To enter Security Group, you need password ( Default password: 1111 ) to enter
Security Group page.
NOTE: There are two ways to set Security On/Off on your ID5101. The first is your added RDID Card , and the second is
Manual Security Group described in this section.
Detector contains CO Detector, Emergency
Button, and Gas Detector.
Lighting contains Lighting 1 and Lighting 2.
Green light means device workable.
Gray light means device disabled.
Red light means device abnormal.