Amroad DP3210, Technical Manual

Page: 6 / 28

AMROAD DP3210
Status Indicator
Status Indicator
Status LED
Green LED Red LED Blue LED
Door Bell
Button
(Green LED)
Description
OFF ON for 1 second OFF ON for 1 second
Boot is initiated.
WL LED is also On for 1 second.
Blinking (3-sec
On, one-sec
Off)
OFF OFF OFF
Boot procedure 1st stage, OS
Initial.
OFF ON OFF ON
Boot procedure 2nd stage, AP
Ready.
ON OFF OFF OFF
Boot is completed, and the device
works normally. (SIP Mode- DHCP,
Static IP, and PPPoE connection
mode).
ON OFF OFF ON
When Door Bell is pressed, or
it
’
s at night (SIP Mode).
OFF OFF ON OFF
Boot is completed. Device works
normally. (Peer-to-Peer Mode).
OFF OFF ON ON
Door Bell is pressed, or it
’
s at
night (Peer-to-peer Mode).
Blinking
(Green

Blue
 Red each
one-sec On)
Blinking
(Green

Blue

Red each one-sec
On)
Blinking
(Green

Blue
 Red each
one-sec On)
OFF Firmware Upgrade
OFF OFF
On 3 seconds
Once
OFF
Reset! Device becomes Static IP
mode.
OFF OFF
Blinking (3-sec
On, one-sec
Off)
OFF SIP is NOT registered.
OFF
Blinking (3-sec Off,
one-sec On)
OFF OFF Network is Disconnected.
OFF
Blinking (One-sec
On 3-sec Off)
OFF OFF
Network is connected, but the
device fails to obtain IP address
3