Amroad DP3210, Technical Manual

Page: 19 / 28

AMROAD DP3210
Extensions
You may configure call services in this page
：
 Called Party Extension Number
：
Fill in the
extension number. When Door Bell
button is pressed, the device will dial to
the extension number. (The extension
number or group that is assigned by IP
PBX.)
NOTE
：
In the Peer-to-Peer mode, you
need fill in the complete extension
number and IP address. e.g.
102@10.3.1.128.
 Called Out Extension Number
：
Fill in the
extension number. When ALARM is
occurred, the device will dial to the called
party extension number.
 2nd Doorbell push invalid timer (0~180s)
：
You may fill in the time interval period for
neglect second pressing doorbell before
the call (Door Bell) is answered. For
example, if the time is set to 10 seconds,
then it
’
s invalid for anybody to press
doorbell the second time within 10
seconds.
Internal Alarm
Alarm will be triggered while stealing.
 Service
：
This is a “Burglarproof” function.
Please disable this function when the
device is not ready or during the device is
repaired.
 Time for alert
：
You can enable or disable
the function of “Alarm will be triggered
while stealing”. Select Disable/3
Min/Always for the time period of alarm
sound when the alarm is triggered.
 Notice Number via Message (SIP)
：
You
may fill in the IP Video phone number
here. The device will inform the IP Video
Phone when the internal alarm is
triggered.

Notice ICMS IP
：
For engineering.
 Notice ICMS Port
：
For engineering.
Default is 8090.
Entrance Settings
16