TM
good tone comes from tweaking . . .
Amptweaker, LLC
5885 Cumming Hwy, Suite 108-98
Sugar Hill, GA 30518
Other Tips & Tricks:
• Effects like compressors, treble boosters, octavers, or
distortion tend to work best in the Effects Loop, set to Pre.
• Effects like delay, reverb, EQ, chorus, vibe/tremolo, and
most others tend to sound best with the Loop set to Post.
• Add an overdrive/distortion pedal in the Effects Loop (set to
Pre) to tweak the TightFuzz for more distortion and sustain!
• Add a clean boost or EQ pedal in the Effects Loop (set to
Post) to add more output level or tweak the TightFuzz tone.
• By using higher Volume and lower Fuzz settings, the
TightFuzz works more like a clean tone(with Tight DOWN,
70
ʼ
s tone) or treble booster(with Tight UP, 60
ʼ
s tone).
• For the thickest and buzziest fuzz, use Silicon, 70
ʼ
s, Edge
OFF, Fuzz turned UP and Tight turned DOWN.
• Select Pre/Effects Send to use it as a switchable
ʻ
clean
ʼ
send to another effects chain, tuner input or amp.
• Select Post/Effects Send to send to some other amp
AFTER the TightFuzz for a big stereo solo tone.
• When using extremely high settings on the Tight control,
you might need to increase your amp
ʼ
s bass control.
handmade in USA
www.amptweaker.com
©2012 Amptweaker, LLC