Resistance Measurement
Prior to any resistance measurement it has to be ensured that the resistor to be
tested does not have live voltage across it. Failure to comply with this
prescription can lead to dangerous user injuries or cause instrument damage.
Additionally, foreign voltages falsify the measurement result.
1) Select measurement range via measurement function selection switch.
2) Connect the black test lead to the COM socket and the red test lead to
the
socket.
3) Connect the test leads to UUT.
4) Read the measurement result displayed on the screen.
Continuity Test
Prior to any continuity test, it must be ensured that the resistance to be measured
does not have live voltage across it.. Failure to comply with this prescription can
lead to dangerous user injuries or cause instrument damage. Additionally, foreign
voltages falsify the measurement result.
1) Position measurement function selection switch to
measurement range.
2) Connect the black test lead to the COM socket and the red test lead to
the
socket.
3) Connect test leads to UUT.
4) Read the measurement result displayed on the screen.
Acoustic beeper will sound if resistance is less than approx. 60 ohms.
!
6
2526044_Rev2_dm9c.qxd 10/26/06 9:50 AM Page 6
