
©2020 Amprobe
®
For detailed specifications and ordering go to amprobe.com 6012404 A
9
Advanced Wire Tracer - Quick Guide
Specifications
AT-8000-R Receiver
AT-8000-T Transmitter
CT-400 Signal Clamp
Measurement Category
CAT IV 600 V
CAT IV 600 V
CAT IV 600 V,
CAT III 1000 V
Operating Voltage
0 to 600 V AC/DC
0 to 600 V AC/DC
0 to 1000 V AC
Operating Frequency
Energized: 6.25 kHz
De-Energized: 32.768 kHz
Energized/Loop: 6.25 kHz
De-Energized: 32.768 kHz
Loop Mode: 6.25 kHz
High / Low Mode: 32.768 kHz
AC current measurement: 45 Hz to 400 Hz
Hazardous Voltage
Detection
See NCV detection
> 30 V AC/DC
N/A
Signal Indications
Numeric bar graph display and audible beep
LEDs and audible beep
N/A
Response Time
Smart mode: 750 mSec
Tip Sensor Energized: 300 mSec
Tip Sensor De-Energized: 750 mSec
NCV: 500 mSec
Battery monitoring: 5 Sec
Line/phase voltage monitoring: 1 sec
Battery voltage monitoring: 5 sec
Instantaneous
Current Output of Signal
(typical)
N/A
Energized circuit:
HI mode: 60 mA RMS
LO mode: 30 mA RMS
De-energized circuit:
HI mode: 130 mA RMS
LO mode: 40 mA RMS
Loop mode: 160 mA RMS
1 mA/A for AC current measurement
with multimeter
Signal Voltage Output
(nominal)
N/A
De-energized circuit:
LOW: 29 V RMS, 120 Vp-p
HIGH: 33 V RMS, 140 Vp-p
Loop model: 31 V RMS, 120 Vp-p
De-energized circuit:
2.4 V RMS, 24 Vp-p
Range Detection (open air)
Smart mode
Pinpointing: Around 1.97-in (5 cm) radius (±2%)
Direction indication: Up to 5FT (152.4cm) (±2%)
TIP Sensor: Energized
Pinpointing: Around 1.97-in (5 cm) (±1%)
Detection: Up to 22-FT (670.56cm) (±1%)
TIP Sensor: De-Energized
Detection: Up to 14-FT (426.72cm) (±5%)
NCV (40-400 Hz)
Pinpointing: Around 1.97-in (5cm) radius (±5%)
Detection: Up to 4-FT (121.92cm) (±5%)
N/A
N/A
Display Size
3.5 in (89 mm)
LEDs
N/A
Display Dimensions
(W x H)
2.76 x 2.07 in (70 x 52 mm)
N/A
N/A
Display Resolution
320 x 240
N/A
N/A
Display Type
Color TFT LCD
LEDs
N/A
Display Color
Yes
Operating mode LEDs: red
Battery status LEDs: green, yellow, red
N/A
Booting Time
30 sec
< 2 sec
N/A
Backlight
Yes
N/A
N/A
Operating Temperature
-4 °F to 122 °F (-20 °C to 50 °C)
-4 °F to 122 °F (-20 °C to 50 °C)
32 °F to 122 °F (0 °C to 50 °C)
Operating Humidity
45%: -4 °F to <50 °F (-20 °C to <10 °C)
95%: 50 °F to <86 °F (10 °C to <30 °C)
75%: 86 °F to <104 °F (30 °C to <40 °C)
45%: 104 °F to 122 °F (40 °C to 50 °C)
45%: -4 °F to <50 °F (-20 °C to <10 °C)
95%: 50 °F to <86 °F (10 °C to <30 °C)
75%: 86 °F to <104 °F (30 °C to <40 °C)
45%: 104 °F to 122 °F (40 °C to 50 °C)
95%: 50 °F to <86 °F (10 °C to <30 °C)
75%: 86 °F to <104 °F (30 °C to <40 °C)
45%: 104 °F to <122 °F (40 °C to <50 °C)
Storage Temperature and
Humidity
-4 °F to 158 °F (-20 °C to 70 °C),
<95% RH
-4 °F to 158 °F (-20 °C to 70 °C),
<95% RH
-4 °F to 140 °F (-20 °C to 60 °C),
<95% RH
Operating Altitude
0 to 6561 ft (2000 m)
Transient Protection
N/A
8.00 kV (1.2/50µS surge)
N/A
Pollution Degree
2
IP Rating
IP 52
IP 40
Drop Test
3.28 ft (1 m)
Power Supply
4 x AA (alkaline or NiMH rechargeable)
8 x AA (alkaline or NiMH rechargeable)
N/A
Power Consumption
(typical)
4 x AA battery: 2W
Hi/Lo mode: 70 mA
Loop mode with Clamp: 90 mA
Consumption without signal
transmission: 10 mA
N/A
Battery Life (typical)
Approx. 9 h
Hi/Lo mode: approx. 25 h
Loop mode: approx. 18 h
N/A
Low Battery Indication
Yes
Yes
N/A
Fuse
N/A
1.6 A, 700 V, fast-acting, Ø 6x32mm
N/A
Maximum Conductor Size
N/A
N/A
1.26 in (32 mm)
Dimensions
(L x W x H)
Approx. 10.92 x 4.43 x 2.55 in
(278 x 113 x 65 mm)
Approx. 7.2 x 3.66 x 1.97 in
(183 x 93 x 50 mm)
Approx. 5.9 x 2.75 x 1.18 in
(150 x 70 x 30 mm)
Weight (batteries installed)
Approx. 1.20 lb (0.544 kg)
Approx. 1.25 lb (0.57 kg)
Approx. 0.25 lb (0.114 kg)
Certifications
Summary of Contents for AT-8000 Series
Page 2: ...AT 8000 Advanced Wire Tracer...
Page 14: ...Traceur de fils avanc AT 8000...