Amprobe ACDC-100 TRMS, User Manual, Page: 11 / 97

10
SPECIfICATIoNS
general Specifications
Display: 3-3/4 digits 4000 counts lCD display
Update Rate: 3 per second nominal
polarity: Automatic
power Supply: standard 1.5V AAA Size (neDA 24g or ieC R03) battery x
power Consumption: typical 11 mA for ACA/DCA and 2.9 mA for other
functions
Apo Timing: idle for 30 minutes
Apo Consumption: typical 10µA for ACDC- 100 and 90µA for ACDC- 100
TRMS
low battery: below approx. 2.4V
environment: indoor operation, below 2000 m
Temperature / humidity:
operating:
0°C to 40°C (14°f to 122 °f)
Relative humidity : < 80% Rh @ 31°C decreasing linearly to 50% Rh at 40°C
Storage: -20°C to 60°C (-4°f to 122 °f) / < 80% Rh
Temperature Coefficient : 0. 5 x (specified accuracy)/ °C @ (0°C to 18°C or 28°C to
40°C)
Sensing : Average sensing for ACDC- 100; True RMS for ACDC- 100
TRMS
Clamp-on jaw: DC 1000A or AC 800A rms continuous
+ & CoM terminals (all functions) : 600VDC/VAC rms
Jaw opening:
50mm max
Dimension : 227 x 78 x 40mm (8.9 x 3.1 x 1.6 in.)
weight : 290 gm ( 0.6 lb)
Safety lVD: Meets en60101-1:2001; en61010-2-032(2002), Category iii- 600 Volts ac
& dc; pollution degree : 2; class 2
�
eMC: This product complies with requirements of the following european Community
Directives: 89/336/eeC (electromagnetic Compatibility) and 73/23/eeC (low Voltage) as
amended by 93/68/eeC (Ce Marking). however, electrical noise or intense electromagnetic
fields in the vicinity of the equipment may disturb the measurement circuit. Measuring
instruments will also respond to unwanted signals that may be present within the
measurement circuit. Users should exercise care and take appropriate precautions to avoid
misleading results when making measurements in the presence of electronic interference.