25
D-0116492-B (OM022)
– Otosure Operating Manual
7.7.
USB LEAD DISCONNECTED
If the USB cable connecting the Otosure becomes disconnected any automatic test running will immediately
cease, and the following message will be displayed:
Once the message has been acknowledged, it will be possible to select control buttons and menu options in
the Otosure window on the PC but these will have no effect. If the Otosure cable becomes disconnected, the
recommended course of action is for the operator to close the Otosure window and return to Audibase. Then
use the “Edit > Cancel Insert/Edit” option or cancel toolbar button to remove any data, and close Audibase.
The Otosure may then be reconnected and Audibase started as usual.
When the Otosure window is closed any thresholds found or plotted will be transferred into Audibase and care
should therefore be taken with the use of this data.
Please also refer to Section 11 for important information regarding the connection of non-medical electrical
equipment to medical electrical equipment.
Summary of Contents for Otosure
Page 1: ...Otosure Operating Manual...