4
·
CHANNEL SELECT:
Select a channel (1-16) by rotat-
ing the knob to select channel number.
·
POWER / VOLUME CONTROL:
To turn on wireless
receiver, rotate volume control knob clockwise.
PW
will light.
This separate volume control is used to set
output level of the wireless microphone. Set
WIRE-
LESS LEVEL
and
MASTER VOLUME
level at desired
setting.
CONTROLS / SIDE PANEL
·
WIRED MICROPHONE:
1/4" input jack
(A).
·
AUX IN:
3.5mm input jack for other audio devices
(B).
·
MIX OUT:
3.5mm output jack for recording device, addition
speaker
(C).
·
TONE CONTROL:
Rotate knob clockwise to increase
TREBLE to desired level
(D).
·
POWER SWITCH:
Rotate
MAIN VOL.
knob clockwise to
the
ON
position. When power switch is in the
ON
position,
the
LOW
BATTERY (RED)
will be illuminated
(F).
·
BATTERY CHARGING: LOW BATTERY LIGHT (F)
will
flash when battery needs to be charged. To charge the bat-
tery, connect
(H)
of the PA to 110-220VAC using the sup-
plied power cord and AC Adapter. The green led
(G)
will
flash
indicating battery is charging. Solid green light means
charging is complete. The battery will charge when unit is
operating with AC power,
HOWEVER the unit will charge
faster with the power switch in the “off” position.
Charging time is about 4 hours.
MASTER CONTROLS
16 CHANNEL UHF RECEIVER
BLUETOOTH
MASTER CONTROLS
NOTE: CHANNEL NUMBER SELECTED ON PA MUST
ALSO MATCH CHANNEL NUMBER ON WIRELESS
HANDHELD MICROPHONE.
A
E
C
B
F
H
D
G
I
J
K
L
WIRELESS RECEIVER
BATTERY DOOR
