C20M-5B Five Signal Repeater
7
Item
Uplink
Downlink
Auto shut-off Functions
Uplink stand-by
Available
Self-oscillation
shutdown
Available
Over input turn-off
Function
Available
Over-heat protection
Available
Self-oscillation Elimination
Available
Link Balance Function
Available
Auto screen lights off
No operation within 3 minutes
Power Supply
DC: 12 V
Power Consumption
< 45 W
RF Connector
N-Female
Impedance
50 ohm
Environment Conditions
IP 40
Humidity
< 90 %
Operating Temperature
0
℃
~ +50
℃
Installation Guides
Installation Requirements
1) With stable and independent power supply.
2) No corrosive gas, smoke or liquid leakage.
3) Sun block and cool for device’s safe running.
4) Easy for cabling and dissipation, safe and easy for maintenance.
5) Waterproof and under thunder protection.
Installation Tools
No.
Items
Quantity
Remarks
1
Percussion drill
1
Drill holes on wall, self-provided
2
Wrench
1
Reinforce the interface connection, self-provided
3
Mobile phone
for testing
1
Test installation effectiveness, self-provided
4
Multimeter
1
Test voltage and wiring connection, self-provided
5
Screwdriver
1
Tighten or fasten the device, self-provided
6
Waterproof tape
A few
Prevent liquid from leaking into the feeder
interface, self-provided
Installation Steps
The repeater should be installed on a solid and hard plane. The installation steps are as
follows:
1) Find a suitable site according to the installation requirements and dimension of repeater.
2) Drill 4 holes with the percussion drill according to the installation holes. Sizes are 7mm.
The expected sites of the holes are as the following diagram.
