A/V Processor Rear Panel
1
AC Input
Connect the supplied AC power cord here. Do not use
standard IEC type power cords.
2
MAIN POWER Switch
Connects and disconnects the A/V PROCESSOR from AC
power. When this switch is on, the Standby/On indicator
on the front panel illuminates. When it is off, all power is
cut and the front STANDBY/ON switch will not function.
3
Antenna Inputs (ATP8700 and ATP7700)
FM and AM inputs for the built-in AM/FM Stereo tuner.
4
Main Zone Trigger Output
This jack provides a 12-volt DC output whenever the
A/V PROCESSOR is switched on. Usually, this jack is used
for automatic turn-on of a compatible amplifier equipped
with a DC trigger input.
5
Zone 2 Trigger Output
This jack provides a 12-volt DC output whenever the
2nd Zone is switched on.
6
12 Volt Trigger Output (ATP8700 and ATP7700)
This jack provides a 12-volt DC output whenever the
A/V PROCESSOR is switched on.
7
IR Input
Connect an external infrared sensor to this inputs. This
allows remote control of the A/V PROCESSOR even
if it is installed in a cabinet with solid doors. It also allows
control of the A/V PROCESSOR from a second room.
8
Balanced XLR Stereo Inputs (ATP8700)
Use these inputs to hook up any stereo analog audio
source with balanced XLR-type connectors.
9
S-Video Inputs
Use these inputs to connect S-Video-equipped devices
such as DVD players, satellite receivers, and S-VHS VCRs.
10 Component Video Inputs
Use these jacks to connect devices with component video
outputs, such as a DVD player or a digital TV tuner.
11 Composite Video Inputs
Use these inputs to connect older video devices, such as
a VCR, a cable box or a laserdisc player. If the device and
your video display have S-Video or component video
connections, use those instead.
12 Composite Video Record Outputs
Connect these video jacks to the input of a VCR
or DVD recorder, so you can record whatever source is being
played in the main room. If the recorder has an S-Video
input, use that connection instead of composite video.
13 Composite Video Outputs
Connect this output to the composite video input of your
video display. Use this only if the display does not have
S-Video or component video inputs.
14 Component Video Outputs
Use this output to connect to a video display that accepts
component video.
15 S-Video Output
Connect this output to the S-Video input of your video
display. Use this only if the display does not have a
component video input.
16 7.1-Channel Balanced XLR Outputs (ATP8700)
These 3-pin XLR type output jacks are provided to
interconnect with an amplifier utilizing this type of
connection. Please note the "polarity" diagram on the
rear panel and ensure that this configuration matches
the polarity of the XLR connectors on your amplifier.
The ATI ATP8700 is completely compatible with ATI
"Pure Balance" amplifiers.
17 Coaxial and Optical Digital Audio Inputs
Use these inputs to connect digital audio devices such as
DVD players, CD players, and digital TV tuners. These
inputs are assignable to any video or audio source.
18 RS-232 Port
This connector can be used either for control of the
A/V PROCESSOR by a laptop or touchscreen such as an
AMX or Crestron product.
19 Optical Digital Audio Output
Connect to a CD recorder, MiniDisc recorder, a computer
or any other audio recording device that accepts optical
digital inputs.
20 Zone 2 Aux Audio Input and Audio/Video Output
This is a dedicated input accessible only from the second
zone. Use the variable output or fixed output jacks to feed
stereo analog audio to an audio system in a second zone.
21 Analog Audio Stereo Tape Input
This input is for analog audio devices, such as cassette
tape decks or CD players.
22 Analog Audio Stereo CD Input
This input is for analog audio devices, such as cassette
tape decks or CD players.
Page 6
