Chapter 2
Installation and Configuration
3.
When you begin to feel resistance, push up on the injector/ejector
handle to seat the system controller fully into the chassis frame. Secure
the system controller front panel to the chassis using the system
controller front-panel mounting screws.
4.
Connect the keyboard, mouse, and monitor to the appropriate
connectors. Connect devices to ports as required by your system
configuration.
5.
Power on the chassis. Verify that the system controller boots. If the
system controller does not boot, refer to your system controller user
manual.
Figure 2-4 shows a PXI Express system controller installed in the system
controller slot of a NI PXIe-1062Q chassis. You can place CompactPCI,
CompactPCI Express, PXI, or PXI Express modules in other slots
depending on the slot type.
Figure 2-4.
NI PXI Express System Controller Installed in a NI PXIe-1062Q Chassis
1
NI PXIe-1062Q Chassis
2
NI PXI Express System Controller
3
Injector/Ejector Rail
1
2
3
NI PXIe-1062Q
Manual
Sales:
+44 (0) 1273 570 220
Website:
www.amplicon.com
Email:
IT and Instrumentation for industry
Amplicon.com
