2-10
Fan Power Connector:
CPU_FAN1, SYS_FAN1/2, FRONT_FAN1, REAR_FAN1
The fan power connectors support system cooling fan with +12V. W hen connecting
the wire to the connectors, always note that the red wire is the positive and should
be connected to the +12V; the black wire is Ground and should be connected to GND.
If the mainboard has a System Hardware Monitor chipset onboard, you must use a
specially designed fan with speed sensor to take advantage of the CPU fan control.
Chassis Intrusion Switch Connector: JINT1
This connector connects to the chassis intrusion switch cable. If the chassis is
opened, the chassis intrusion mechanism will be activated. The system will record
this status and show a warning message on the screen. To clear the warning, you
must enter the BIOS utility and clear the record.
Important
1. Please refer to the recommended CPU fans at processor
’
s official website
or consult the vendors for proper CPU cooling fan.
2. Users are suggested to enter the BIOS Setup Utility to set up the Smart Fan
Control function.
DVD/CDROM Connector: FPC1 (Optional)
This connector is designed to connect slim DVD/CD-ROM drive.
FPC1
CPU_FAN1,
SYS_FAN1,
FRONT_FAN1
S
E
N
S
O
R
+
1
2
V
G
N
D
C
O
N
T
R
O
L
SYS_FAN2,
REAR_FAN1
SE
N
S
O
R
+1
2
V
GN
D
CO
N
T
RO
L
JINT1
1
2
CINTRU
GND
Manual
Amplicon.co
IT and Instrumentation for industry
Sales:
+44 (0) 1273 570 220
Website:
www.amplicon.co
Email:
m
m
m