11
O
PERATING THE
R
ECEIVER
Switching the night light on/off
Press the button three times.
This icon appears in the display for a few seconds.
Use this button to switch the night light on the transmitter on or off.
Switching the vibration alarm on/off
Press the button four times.
This icon appears in the display for a few seconds.
Use this button to switch the vibration alarm on or off.
When the vibration alarm is activated, the receiver vibrates when
sounds in the room being monitored are so loud that the red Sound
Level LEDs are activated.
Adjusting the VOX sensitivity
(VOX: Voice Operated Transmission = Sound detection)
The VOX function (sound detection) causes the system to start transmitting
automatically from the transmitter to the receiver immediately a voice or
sound is detected.
Press the button five times.
This icon appears in the display for a few seconds.
Use this button to set VOX to OFF or adjust the sensitivity to one of
5 levels.
When one of the five levels has been set, the VOX LED lights up red
and the display goes out after 10 seconds.
Helpline UK 0844 800 6503
(See page 18 for costs and hours of operation)
Summary of Contents for Watch & Care V100
Page 1: ...User Guide Watch Care V100...
Page 19: ...15 Helpline UK 0844 800 6503 See page 18 for costs and hours of operation Appendix...
Page 27: ...23 Helpline UK 0844 800 6503 See page 18 for costs and hours of operation Index...
Page 30: ...Distributed by Audioline GmbH D 41460 Neuss September 2011 Issue 1 2...
