12
6.
CALLER DISPLAY (NETWORK DEPENDENT)*
This feature* is available if you have subscribed the Caller Line Identification
service with your telephone service provider. Your phone can store up to 50
received calls with date/time information in the Call List. The number will be
shown on the LCD when the phone is ringing.
If the caller number is disabled to send caller information, “
Withheld
” will
display.
If the caller number is not provided, “
Out of Area
” will display.
In standby, if three unanswered calls are received, “
3 New Calls
” will be
displayed.
6.1. View the Call List
All received calls are saved in Call List with the latest call putting at the top of
the list. When the call list is full, the oldest call will be replaced by a new call.
The unanswered call which has not been read is marked with .
1. Press and hold key. OR
Press
and / to select
Call list
, press .
2. Press / to select the desired entry.
6.2. Call from the Call List
In idle:
1. Press and hold key. OR
Press and / to select Call list, press
.
2. Press to dial out to the selected phonebook entry.
7.
REDIAL THE LAST NUMBER
You can redial up to 10 of the last numbers called.
In idle mode, press and hold key to access the redial list.
1. Press / to browse the redial list.
2. Press to dial the selected redial number.
8. PHONE SETTING
8.1. Set the Ringer Melody for Internal/External Calls
1. Press
and / to select
HS Settings
.
2. Press
and / to select
Ring Setup
.
3. Press
and / to select
Int Ring
or
Ext Ring
.
4. Press and / to select the desired ringer melody from the melody
list.
Note: The respective ringer melody will be played while browsing the melody list.
5. Press
to confirm.
8.2. Set the Ringer Volume
1. Press
and / to select
HS Settings
.
2. Press
and / to select
Ring Setup
.
Summary of Contents for BigTel 1500
Page 1: ...BigTel 1500 BigTel 1502 BigTel 1503 User Guide ...
Page 22: ...22 ...