Ampler – Curt
16
Ampler Pedelec
4.1.4 Brakes
The Pedelec is equipped with a front wheel brake and a rear wheel
brake. Get familiar with your brake system and pay attention to
the brake lever designations. Always check which brake lever
operates which brake before you start your ride. Both brakes are
hydraulically actuated disc brakes. The reach adjustment screw
can be used to change the distance of the brake lever blade to
the handlebar.
1 Brake lever blade
2 Reach adjustment screw
3 Brake hose
4 Clamping screw
4.1.5 Saddle and Seatpost
The saddle is adjustable in height and tilt angle.
1 Saddle
2 Seatpost
3 Saddle clamp (5 mm hex sockets, key
not
included)
4 Seat tube
5 Seatpost clamp (4 mm hex socket)
4.1.6 Wheels
The wheels consist of the rim with spokes and hub, the brake discs and the tires, as well as the rear sprocket for the belt drive.
The electric motor is integrated into the hub of the rear wheel and transmits its torque via a planetary gears and clutch system.
The clutch automatically disengages when the motor is off or when the speed of the rear wheel exceeds that of the motor
(above 25 km/h).
4.1.7 Lighting system
The Pedelec is equipped with a front light mounted to the fork crown and a rear light integrated into the rear fender.
The front and rear reflector must be attached during assembly. The front and rear lights are powered by the battery.
1 Front light
2 Front reflector
3 Rear light
4 Rear reflector
Even if the battery power is low and the electric drive shuts off, the lights remain on for sufficient time to bring you home.
