Amphenol Temposonics G Series, Brief Instruction, Page: 9 / 12

Temposonics
®
G-Series
Brief Instructions
I 9 I
G-Series GP with U-magnet
Reference edge of mounting
Sensor electronics housing
Start position
Stroke length 28
(1.1)
66 / 71*
(2.6 / 2.8*)
* Stroke length > 5000 mm (196.85 in.)
G-Series GP with block magnet
Reference edge of mounting
Sensor electronics housing
Start position: 25.5 (1)
Stroke length 28
(1.1)
66 / 71*
(2.6 / 2.8*)
* Stroke length > 5000 mm (196.85 in.)
G-Series GH with block magnet
Sensor electronics housing
Reference edge of mounting
Stroke length 51
(2.01)
63.5 / 66*
(2.5 / 2.6*)
* Stroke length > 5000 mm (196.85 in.)
Start position: 48.5 (1.91)
4.2 Mounting dimensions of G-Series
G-Series GP with magnet slider »S«, »N«, »V«, »G«
Sensor electronics housing
Reference edge of mounting
Start position: 12 (0.47)
Stroke length 28
(1.1)
66 / 71*
(2.6 / 2.8*)
* Stroke length > 5000 mm (196.85 in.)
G-Series GH with U- / ring-magnet
Sensor electronics housing
Reference edge of mounting
Start position
Stroke length 51
(2.01)
63.5 / 66*
(2.5 / 2.6*)
* Stroke length > 5000 mm (196.85 in.)
G-Series GT2 / GT3 with U- / ring-magnet
Sensor electronics housing
Reference edge of mounting
Start position
Stroke length 51
(2.01)
63.5
(2.5)
Controlling design dimensions are in millimeters and
measurements in ( ) are in inches
Manuals, Software & 3D models
available at: www.mtssensors.com