Amphenol Temposonics G Series, Brief Instruction, Page: 11 / 12

Temposonics
®
G-Series
Brief Instructions
I 11 I
5.1 Analog
LED Outputs
• Analog
• Start / Stopt
D60
M16 connector Pin Function
1
2
3
6 5
4
View on sensor
1 Position
2 DC Ground
3 USB programmer
4 USB programmer
5 +24 VDC (−15 / +20 %)
6 DC Ground (0 V)
Analog LED status
Green Red Information
ON OFF Normal function
ON ON Magnet not detected
Flashing OFF Serial programming mode
H
XX
/ R
XX
Cable Color Function
GY Position
PK DC Ground
YE USB programmer
GN USB programmer
BN +24 VDC (−15 / +20 %)
WH DC Ground (0 V)
Start/Stop LED status
Green Red Information
ON OFF Normal function
ON Flashing Missing external start signal
ON ON Magnet not detected
Flashing OFF Serial programming mode
D60
M16 connector Pin Function
1
2
3
6 5
4
View on sensor
1 Stop (−)
2 Stop (+)
3 Start (+)
4 Start (−)
5 +24 VDC (−15 / +20 %)
6 DC Ground (0 V)
5.2 Start / Stop
H
XX
/ R
XX
Cable Color Function
GY Stop (−)
PK Stop (+)
YE Start (+)
GN Start (−)
BN +24 VDC (−15 / +20 %)
WH DC Ground (0 V)
Manuals, Software & 3D models
available at: www.mtssensors.com