amperis TC706, User Manual

Page: 42 / 45

Please follow the table below to diagnose and correct the problem. If problem still exists, please
contact our service department
Problem $92
The camera does not
power on.
• Battery not installed or installed incorrectly
-> Install battery or re-install battery
• Battery is out of power.
-> Change battery.
• “Power off” protection is enabled
-> Wait for 5 seconds and reboot.
The camera powers off automatically.
• Battery is out of power.
-> Change battery
• AutoOffTime option is enabled
-> Set as None.
Battery depletion is too fast
• Environmental temperature is too low
• Rechargeable battery is not charged completely.
-> Recharge the battery.
• Rechargeable battery is out of power completely and cannot be
recharged.
-> Change to new battery.
No thermal image • Lens cover is not removed.
-> Remove lens cover.
• In image freeze status
-> Press C key to exit.
Thermal image is white-black. • White-black palette is selected
-> Select normal palette.
www.amperis.com
42
support: info@amperis.com t (+34) 982209920
TROUBLESHOOTING