Parts Identification
1
1. LED INDICATORS
POWER LED for DC input and ACTIVE for zone activation.
2. ALL CALL SWITCH
3. FRONT PANEL ZONE SWITCH - ZONE 1 - 8
4. DC SUPPLY INPUT
5. PAGING MIC INPUT
The connectors are to link to paging mics via EX2800 using 2 pair screen cable or from paging Mic using RJ45 connector.
3
2
4
5
6
7
8
+
DC 24V
5
TIME OUT 5 MIN
LINE / MIC OUTPUT
MASTER / SLAVE
0
L
S
M M
9
10
All zones will be activated by pressing this switch, regardless of any inactive zone.
Switching for zone 1 to 8. For grouping of zones using matrix, please refer to page 7.
6. MIXER INPUT
7. AUDIO OUTPUT
Audio output from the decoder is balanced line output level. RJ45 connector consists of audio, data and power with the
following pin configuration:-
Pin 1 - Data A
Pin 2 - Data B
Pin 3 - Relay Trigger Signal
Pin 4 - NC
Pin 5 - +24V Supply
Pin 6 - Audio -ve output
Pin 7 - Ground
Pin 8 - Audio +ve Output
PAGE 2
TD6080 | 8 CH DECODER / ZONE SELECTOR
24V DC supply is required to operate this unit. Ensure polarity is correctly terminated to the port. It is recommeded
that supply with 1A rating of regulated source is used. Amperes PS9400 is recommended as a DC supply source to your
installation.
BGM source from mixer output. This shall be used when there is audio (BGM) grouping in the system for zones
of the decoder.
Front View:
Rear View:
