Parts Identifications
PAGE 3
PM1060 / 1120 DESKTOP PAGING MICROPHONE WITH ZONE SELECTOR
4. CHIME / TALK SWITCH
Pressing this switch shall send signal for zones activation and follow by a 4 tones up chime. Gooseneck
microphone LED shall lit to indicate that the console is ready for announcement.
Pressing the switch again shall deactivate the console in which a 4 tones down chime shall be broadcasted
before ending the zone selection.
8. POWER AND DATA PORT
Connect these RJ45 connectors to external devices like MA2000 / ZS Series zone selector remote trigger
ports. PM1060 / PM1120 shall take DC 24V power from the external devices and provide control signal for
zone selection.
6. MICROPHONE VOLUME CONTROL
Adjust mic volume.
5. CHIME VOLUME CONTROL
Adjust chime volume
7. BALANCED MIC OUT
Paging signal is sent out via this port. Connect this port to audio amplifier / mixer using a 1/4” stereo phone
jack. The output audio is a balanced signal and the level can be set to mic or line level via a switch located
at the bottom of the console.
Mic / Line level switch
Line
Mic
The output level can be set to mic / line level by toogle a switch
located at the bottom of the unit.
PHONE JACK
TIP : +VE / HOT SIGNAL
RING : -VE / COLD
SLEEVE : GROUND / SCREEN
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
PIN 1 to 6: Z1 - Z6
PIN 7: DC 24V
PIN 8: GND
PIN 1 to 6: Z7 - Z12 (only available on PM1120)
PIN 7: DC 24V
PIN 8: GND
